Hartford Arms Display HSCA Annual Meeting

Anyone Going to the SHOT Show?

Are any of the HSCA members planning on attending the SHOT Show in Las Vegas in January? I will be there in the High Standard booth at times, but I'm sure any HS Collectors at the show will have the HS booth at the top of their list!

January 2016 Newsletter

The January, 2016 issue of the HSCA Newsletter was mailed Wednesday, Dec. 30 to the current 2016 HSCA members.  If you are not paid up for 2016, the newsletter was not mailed to you.

Thanks to the contributors to this issue:
jon Miller, Stan Chapman, Tom Horner, Scott Archer, Jerry Watson, Brian Rebuzzini, Jim Gray, Wayne Davis, Steve Schrott, Dick Baker, Alan Aronstein, John Stimson, Steve Stafford, Marcia Mighell and Ralph Boineau.

Records and Rumors

 

Records and rumors.

 

In my interviews with many sources, I've heard some interesting stories about Gus Swebilius.  Carl Gustave Swebilius emigrated from Sweden as a young man. He was one of the founding members and later President of what become High Standard.

        I cannot confirm any authenticity, but here they are:

 

Gus was  a hands on type of guy.  He made a model of the firearm and then sent the model to the engineers to make drawings.

 

He would go out with the crew for late night bowling and drinking.  (High Standard supported several athletic clubs including baseball, golf, archery, bowling, basketball and others.)  Late one night/early morning Gus had was making his way home after being over-served at a bowling league.  He reportedly commandeered a milk wagon to get home without permission.

 

During WWII Gus hired a "colored" engineer for the plant.  This upset the other engineers to the point that they went to his office with an ultimatum.  "Either you fire him or we all quit."

Gus responded "Sorry to hear that, I will sure miss you fellows."

 

Here is a story not related to Gus.

 

High Standard produced silenced .22 caliber pistols for the OSS in WWII.  That is fact.

The head of OSS was Medal of Honor recipient Wild Bill Donovan. (This Donovan was never a High Standard employee.)  The story circulated is that Donovan took one of the USA Model HD M/S pistols and a sand bag into the Oval Office where President Roosevelt was dictating a letter to a typist.  Reportedly Donovan was able to fire a magazine of bullets into the sand bag in a trash can without the President noticing.  Donovan withdrew the magazine and presented the pistol the Commander in Chief.  Roosevelt said "Bill, you are the only ******Republican I know who I would trust to do something like that." 

 

One of the M/S pistols went to Roosevelt's home for some time until it was discovered that it was still a classified military weapon.  It was subsequently returned to OSS.

 

Good tales.  Possibly based in truth.

 

 

 

 

How much restoration is appropriate?

Well, I recently bought a well used Sport-King.  It was poorly stored and developed some rust pitting at the rear top of the slide.  So after some discussion with friends, I was wondering how much "restoration" should a collector do in this sort of situation?

I felt that honest wear such as the patina on the grip should remain, but damage such as rusting from careless handling could be improved upon since the collector value has already been impacted.   It seems to me that cleaning, only the rusty area of the slide with steel wool and re-blueing the area might be a reasonable thing to do.

So, any thoughts?

High Standard 12" Steel Competition Pistol

That cool 10" Hartford Arms in the post just below got me thinking (dangerous, that!) maybe I have a picture of my original 12" custom carbon fiber barreled High Standard.

This is the pistol I shot the first time I entered the Steel Challenge world championships eight or ten years ago.

I realized that the level of competition was going to be beyond anything I had ever seen before, and my goal was to shoot the match and just not be dead last in Rimfire Open Division. Although I didn't exactly set the world on fire with blazing speed, the long barrel and the fact that it was a High Standard, a marque seldom seem in speed steel shooting events, definitely got some attention.

....... and yes, I wasn't dead last! WOO HOO!

Hartford Arms pictures

Below 10" barreled Hartford single shot #4,  Photo of (2) 22 SHORT Mdl 1925's inc. box, period advertisement listing 22 SHORT Mdl 1925 for retail sale.

A Counterfeit High Standard is Found Out

I had no idea that there were people counterfeiting High Standard Pistols by converting a less expensive model to look like a rare and valuable one.

In case you missed it in the Comments to a previous post regarding counterfeit High Standard Slant Grip Victors, check this out:

COMMENTS:

1. Wayne DavisNovember 10, 2015 at 6:50 PM

   One correction: the highest serial number for a slant grip Victor is 2,460,614 according to John Stimson.

   Reply
2. 
   John StimsonNovember 11, 2015 at 10:58 AM

   There is another fraudulent slant grip Victor that visually is close to perfect from the photo I have seen. However the serial number is for a catalog number 9205. Not only the serial number log but the invoice confirms the fraud.

   Reply
3. 
   Wayne DavisNovember 12, 2015 at 7:39 PM

   So the final selling price for this pistol was $2275. Yikes!

   Reply
4. 
   UnknownNovember 28, 2015 at 2:59 AM

   Hello guys:
   
   I'm the guy who purchased the gun...Here is the good part of the story; had I not located this collector group web site yesterday, I would have been stuck with the gun. However, the seller has agreed to take the gun back from me and we're working on that now.
   
   So, all I can say gents is; THANK YOU for being out there keeping an eye on things like this.
   
   And, I plan on sending back the 102 I purchased just recently which I haven't received yet..
   
   Fred Olsen
   fredolsen59@gmail.com

   Reply
5. 
   AnonymousNovember 28, 2015 at 8:01 AM

   Thank you for posting these pictures side-by-side for comparison. Worth way more than a thousand words.
   This is the type over valuable information that makes it worth the money to join!

   Reply
6. 
   Wayne DavisDecember 3, 2015 at 6:07 AM

   Fred, I appreciate your reply concerning this pistol and the 102 pistol you also purchased. I am glad you are getting your refunds. This new weblog and John Stimson's www.histandard.info site are good places for High Standard aficionados to obtain valuable information concerning these guns.
   
   We hope this weblog will be a resource for collectors in the future.

Presidential Welcome

On behalf of fellow members, the HSCA Board of Directors and myself, I welcome you to the High Standard Collectors' Association Blog.

We present to you an interactive blog for communication between enthusiasts who collect, research and shoot High Standards.  We present the opportunity to publish photos and commentary and to actively participate in our association.

HSCA is a group of friends who have annual meetings and regional meetings to display our collections and talk  about them. We meet to enjoy the camaraderie of like minded collectors.  We Have FUN.

Ken and Mickey Rabeneck publish our exemplary newsletter.  It contains pictures and information on High Standards, their maintenance, the company and employees and even its predecessors Fiala and Hartford pistols.

John Stimson's website is another  research resource information.

Many thanks to Mike Gallion who created and monitors this website.  You had a great idea and executed it well.  Good job.

Welcome,

jon Miller, president
High Standard Collectors' Association

Louisville KY Blogger Help Request

Is there a blogger in Louisville who is familiar with and regularly using Blogger who would be willing to give another Louisville (Soon-to-be) gun blogger a hand with the basics of how to use Blogger to post stuff? As other Blogger users know, it's pretty easy to use, but if you are not familiar with it, you can have a bit of trouble in the beginning.

I am a member of the High Standard Collectors' Association, and I am in the process of setting up a public Blogger blog primarily for HSCA members, but available for reading by anyone interested in High Standards. Jon, our President, could use a hand getting started. Anyone in the area that can help?

THANKS!

Hartford Arms

Happy Holidays everyone!  Looking forward to posting soon!  If you are on Facebook check out my page Hartford Arms And Equipment Company.  Stefan Cohn

Cody Museum

When I went to Great Falls Montana for our HSCA meeting, I got a chance to drive down to Cody Wyoming and visit the Cody Museum.  I am not a museum person, but this one has something for everyone.  When I got to gun wing, I finally found the High Standard display all from the Franklin A. & Barbara G. Bereny Foundation.  I thought it was a great display, but when I got back to Great Falls, the guys were telling me all of the good stuff was in the basement, which was closed off the day I was there.  I guess I didn't get to see the good stuff, but I enjoyed the museum none the less.  The guards at the entrance are very informative and helpful, so if you visit, make sure you ask to get into the basement.

Do It Yourself Magazine 'Lipper'

The question came up in the HS Forum regarding magazine lip bending tools. I make my own at a cost of approximately 25 cents each, depending on the cost of a worn out screwdriver at a garage sale!

I wrote up a full article with pictures at my gun blog Mr. Completely. If you are interested, go have a look!

Happy Lipping!

Slant grip Victor replica/fake listed on GunBroker

There is a pistol listed on GunBroker initially advertised as a slant grip Victor (Auction # 519950291).  After getting information from John Stimson concerning the gun, the seller (to his credit) added a note stating the pistol originally shipped as a Sharpshooter.  The pistol exhibits several characteristics that show it is not an original slant grip Victor (SGV).  I have attached photos of the gun, and a photo of an original SGV (bottom one) for comparison.  The following are things that are inconsistent with the characteristics of a SGV:

 

1.  The serial number is outside of the range of numbers for slant grip Victors.  This pistol's serial number is 2,499,151.  Thanks to John Stimson, we know the serial number range for SGVs is 2,401,860 to about 2,460,614.  John looked up the serial number and found that it shipped as a Sharpshooter.

2.  The frame has non-factory stippling on the front and rear grip straps instead of longitudinal serrations like slant grip Citations and Trophys of the time. 

3.  The slide is from a series 107 Victor. The rear of the slide has been reshaped in an attempt to blend the slide to the slant grip frame.  However, it still does not fully mate to the frame like an original slide would, and is not the same contour as a slant grip gun.  The appearance  of the slide with the incorrect serration pattern is probably the most notable inconsistency at first glance that indicates the gun is not an original SGV.

4.  The barrel and rib are likely from a series 107 Victor.  The rear of the rib has had the extension under the sight blade ground off to more closely resemble the way the SGV ribs were made.  The grinding job left a small notch at the rear of the rib that indicates it was ground down instead of being factory produced. 

5.  The trigger and slide release are not correct for a SGV (non-gold plated trigger with overtravel screw, and blued safety).

6.  There is no trigger pull weight adjustment screw in the rear of the frame.

 

I have also attached a photo of an original SGV for comparison (bottom photo).

 

The current bid price is a bit over $1000, which seems high to me for a SGV clone/fake.  The condition of the pistol is less than 95%.

 

This gun is a pretty good example of how a person who is not very knowledgeable concerning SGVs could end up paying quite a bit more for a replica/fake gun than warranted.

 

 

 



Authentic Slant Grip Victor



Rack of Pistols

Just for fun, here is a rack of High Standard pistols that I photographed some time back.  They are mostly series 106 and 107 pistols.   Note the John Giles Citation on top row, 2nd from left.

 

Taking photos of stainless steel or nickel plated guns

I was taking some photos today of a couple of stainless steel pistols, and I need some advice on how to obtain good photos without glaring hot spots on the metal. 

Where's the 22 Ammo?

Please feed me!

Most of us collect High Standard .22s.  What I want to know, after several years of ammo shortages, why can't I get standard velocity .22 cartridges?  I can understand that the manufactures may have not been able to keep up with the hording at first, but years have gone by and I still have trouble finding standard velocity cartridges.  What is the problem?

Burned Citation

I am attaching a photo of the Citation that I rebuilt after it was burned in our vacation home.  This is from the article I wrote for the last HSCA newsletter.  I think the color photo is pretty interesting, so I hope you like seeing it.  I have also added a photo of the pistol after rebuilding it. 

High Standard Fakes

I am planning to write an article concerning faking of the more expensive High Standard pistols (i.e., slant grip Victor, and 10-X pistols).  If you have any information or tips on things to look for when inspecting potential purchases, please comment.  I will collect these and see if I can write the article so that it may be of help to purchasers.
Thanks,
Wayne

.22 standard velocity ammo

Hi Tom,
In order to comment on the post you drafted today, the post needs to be published using the publish button on the top right side of the page.  I am not sure if you were still planning to add more information.

In any case, Palmetto State Armory has CCI SV .22 for $45 per brick with no limit.  Shipping is about $15 for 4 bricks.  This is more expensive than a few years ago before the shortage, but it is available.  Natchez Shooters Supply has 50 rd. boxes for a little less, but a limit of 10 boxes per day, so the shipping will probably exceed the price/ round from Palmetto State.

Sport King

Here is a photo of the Sport King pistol I obtained this week.  It is an electroless nickel model.  These were made in the last years of High Standard production. 

The pistol was shipped in a plain white box with a Sport King specific label.  The packer wrote EN for electroless nickel on the label and marked the model number in ink. 

Included in the box was a hang tag, instruction sheet, and warranty sheet. 

My First Hi Standard, a Model B

Here's a picture of my first Hi Standard, a Model B. I bought it with a number of parts missing, including the grips. I made the grips on it out of some nice walnut I had on hand.

For my gun blog review of this gun on the Mr. Completely gun blog, Click HERE.

(Note: This is an example of how we can put links to other articles here on the HSCA blog. If you are unfamiliar with blogging and blog comments, have a look at all of the comments following the blog post on the Model B.) 

By the way, I still have this Model B, and it's STILL not for sale!

"Comments" Section Adjustment

There was a small problem with the comment part of the blog that I fixed. It was asking for too much verification and sometimes blocking the comment before it would allow your comment. It seems to be working now as it should.

HSCA's 2015 Annual Convention in Great Falls, MT

Just got back from the High Standard Collector's Associations annual convention that was held in conjunction with the Great Falls Gun Show, which is a pretty good sized show of approximately 600 tables.

Here's a few pics from the show, and a link to a video at the bottom of the post. You can click on any of the pictures to make it bigger.

 The local TV stations were there too and  we got some nice media exposure on their local news.

Here's a direct link to the KPAX TV website for the video:

http://www.kpax.com/story/30127243/high-standard-collectors-association-new-vendor-featured-at-great-falls-gun-show