Welcome to the blog of the High Standard Collectors' Association. Feel free to browse around and enjoy! If you have a question about one of our posts, or have something to add, please leave a comment by clicking on COMMENTS or COMMENT just below the post. We'd love to hear from you!
Friday, October 23, 2015
Taking photos of stainless steel or nickel plated guns
I was taking some photos today of a couple of stainless steel pistols, and I need some advice on how to obtain good photos without glaring hot spots on the metal.
Here's a few tips: 1. Avoid using the flash if you can. 2. Avoid camera angles that are 90 degrees from a flat reflective surface. 3. Flat light overcast days outdoors can work well. 4. Put a piece of Kleenex over the flash to diffuse and soften the light. 5. Put a piece of white paper at a 45 degree angle in front of the flash to redirect the flash upward to bounce it off the ceiling. 6. Try a polarizing filter on the camera lens.
Here's a few tips:
ReplyDelete1. Avoid using the flash if you can.
2. Avoid camera angles that are 90 degrees from a flat reflective surface.
3. Flat light overcast days outdoors can work well.
4. Put a piece of Kleenex over the flash to diffuse and soften the light.
5. Put a piece of white paper at a 45 degree angle in front of the flash to redirect the flash upward to bounce it off the ceiling.
6. Try a polarizing filter on the camera lens.
Hope this helps!