HSCA Dues

Just a reminder to members.  2019 dues are due now.  If you have sent them in, now would be a good time.  I wish everyone a Merry Christmas.

High Standard Bibliography

NOTE:  The other day, a fellow High Standard collector and I were discussing books that have information useful in our search for H S pistols.  Toward that end, I prepared the following list for him.  I thought it might be useful to other people.

Jerry Watson

HIGH STANDARD BIBLIOGRAPHY

High Standard Automatic Pistols 1932-1950 by Charles Petty...The Gun Room Press

This is the quintessential beginning primer on all the early models.  Some minor numerical errors as to quantities, but a very good source for information that is not available elsewhere.  Most of the later books and magazine articles quote Charles Perry's quantities, dates and factory information.

 

The Hi-Standard Pistol Guide by Burr Leyson...Duckett's Publishing
This was written by a gunsmith covering the early models, 1932 through 1953.  This writing contains good background information on the different models with the best illustrations, gunsmithing procedures, repair discussions, and tuning information available on High Standard semi-automatic pistols.  Before you try to fix it, you must read this book first.

 

Hi-Standard Autoloading Pistols 1951-1984 by Jim Spacek
Hi-Standard Pistols & Revolvers 1951-1984 by Jim Spacek
There were actually three different books written by Spacek.  All were short on written descriptions, but contained copies of lists, diagrams, pictures and previously printed information.  Much of it is from catalogs, and the paperwork that came in the original pistol boxes. There are lists of the different models along with quantities, catalog numbers, and other useful information.

 

High Standard, A Collector's Guide to the Hamden & Hartford Target Pistols by Tom Dance …Andrew Mowbray Publishers
This is the quintessential primer and the best guide to the later model High Standards.  It has some minor errors, but is the only source for the Supermatic series, Models 101 through 104 and the Military grip guns.  It contains much discussion about the individual models and some factory background.

 

U.S. Handguns of World War II by Charles W. Pate...Andrew Mowbray Publishers
This is a great book with an excellent section on High Standards made for the military: Model B, Model USA H-D and the USA H-D MS.  There are great pictures and detailed discussions.  This book allows the reader to make comparisons between High Standard pistols and those manufactured by the other U.S. firearms manufacturers.

 

U.S. Military Match Pistols and Marksmanship Automatic Pistols by Bill Jenkins...Andrew Mowbray Publishers
Bill is a Florida gunsmith who has put together an excellent reference that includes all the High Standards ever used by the U.S. Military in their marksmanship programs.  This includes the post war model High Standards, as well as the WW II guns.  This book allows the reader to make comparisons between High Standard pistols and those manufactured by the other U.S. firearms manufacturers.

 

OSS Weapons II second edition by Dr. John W Brunner, Ph.D...Philips Publishers

This reference has lots of information and pictures of the High Standard Model USA H-D MS (military silenced) which is more than any other source that I have found.  Besides being the best source of information on the USA H-D MS, all the other gadgets and armaments designs used by thee OSS are very interesting and worth the read.

 

HSCA Annual Meeting and Show, Birmingham, AL

The HSCA held its annual meeting in conjunction with the Alabama Gun Collectors Association gun show in Birmingham, Alabama, October 13 and 14, 2018.  This was the first time the HSCA participated in a show in Alabama.  HSCA member Jack Page hosted the show and dinner for the HSCA.  The display tables were provided free of charge to our association members.  This was a fairly modest show by our members.  Ken Rabeneck displayed High Standard memorabilia and papers, and other interesting items.  Jon Miller (aka Mr. Crusader) displayed his phenomenal collection of Crusader engineering samples, pre-production samples, sales samples, and production revolvers. 

The highlight for the members was having Dick Baker attend the show with us.  He was an engineer at High Standard for many years.  We enjoyed hearing about the workings of High Standard in those days, and he had a lot of stories to tell.  We learned interesting things concerning the design and production of the Crusader revolvers.  One thing I did not know before was that the Crusader project turned out to be not profitable for the company, and thus the life of the project was not long. 

We had the annual meeting during the gun show on Saturday, and after the show we went to a local BBQ restaurant for a nice meal and discussion time with the members.  Dick Baker spent a good deal of time answering questions and talking about his time at High Standard. 

Advertising items.

Click on the photos to enlarge them.

 



Ken Rabeneck's display of memorabilia and
related items.



High Standard patches. etc.

High Standard catalogs and papers.

Members in attendance:
Seated, Wayne Davis, Dick Baker
Standing:  Ken Rabeneck, Jack Page, Jon Miller,
Dave Lehman, Tom Horner, and Tom Bolander



 


Jon Miller's Crusader display

 


Prototypes





Salesman sample

Dick Baker with the Crusader revolvers

 
 

2018 Northwest Regional HSCA Meet, August 11th and 12th

The 2018 Northwest Regional Meeting was a very successful endeavor attended by ten of our members and one friend. A number of other HSCA members stopped by to say hello. The assembled members were in total agreement to expand our show for next year, so Jerry requested more tables in the application for that show. The Oregon Arms Collectors Gun Show is an excellent venue for the HSCA as sale table offerings and exhibits are limited to only “Collectible and Antique fire arms”.  Several people picked up applications for membership from our Membership Table.

Display Awards went to the following: Bill Riebe, Best of Show, for his Early Guns; Garry Hooper, Most Educational Display Award; and Bert Markel, Judges Choice Award for his display of Olympics. As can be seen in the images, the other High Standard displays were excellent, and this had the judges scratching their heads to make their decisions with only three awards to give.

Click on the Photos for Larger Images

Pat Batten left and Bill Riebe from Bosie, ID, displayed early auto's.

Bert Markel left from Des Moines, WA, and Greg Markel form Bellingham, WA, displayed their Olympics.

Garry Hooper from Montague, CA, displayed auto pistols.

Jerry Watson from  Salem, OR, displayed Standard Grip Models 102, 103, & 104.

Marcia Mighell and Larry Vallard from South Beach, OR,  manned the New Members table.

Mike Gallion and his race guns from Clinton, WA.

Pair of 1972 Olympic Commemoratives displayed by Bert Markel.

Smokey Grant from Sweet Home, OR, displayed revolvers & derringers.

MVACA Show in Kansas City, MO, July 28th and 29, 20018

The annual Missouri Valley Arms Collectors Show was attended by several High Standard Collectors' Association members.  The displays by our members were outstanding.  We talked to many people about High Standard firearms and we had a good time.  The thing that I always feel when viewing the displays is gratitude for the dedication and perseverance of each collector.  These displays show guns that one would never be able to see in person without the collectors' efforts.  I applaud each one for their dedication to this association.  Doran Houk, Jon Miller, and Dan Rathgeber were each awarded Judge’s Choice plaques for their displays.  Congratulations to them.

 The dinner on Saturday evening at Nick and Jake's was attended by members and spouses.  We discussed a number of topics, but spent most of the time talking about High Standards and collecting. 

Note on the photos:  Click on a photo to see a larger image.

Dave Lehman's display was of cased percussion revolvers.  He had the most complete set of revolvers I have seen in one display.  These guns are the .36 caliber cap and ball reproductions of Confederate models made by various companies during the Civil War.  Most of the parts for the guns were made by Uberti in Italy, but the frames and finish work were done by High Standard. 

Bicentennial Commemorative
Revolvers

Percussion Revolvers

Schneider & Glassick

 Griswold & Gunnison,
Leech & Rigdon

Ken Rabeneck's display showcased the 10-X pistols assembled by Bob Shea.  Another nice group of pistols.

Full view

Texas 10-X pistols by Bob Shea

Bob Shea Commemorative 10-X

Conn. 10-X pistols by Bob Shea



Jon Miller's display highlighted the High Standard Crusader revolver development process.  His display was a tremendous selection of firearms that showed the creation of the revolvers, the production effort, and the end products.  These are beautiful creations and well worth collectors consideration for additions to their collections.

Jon showing his display



Many special firearms



Salesmen's sample
The only engraved 6.5 inch Crusader



Jon and his salesmen's
sample revolver



Nice pairs of .44 Mag and .45 Colt revolvers
Note the serial numbers

Dan Rathgeber's display was a complete review of .22 short pistols made by High Standard from the 1930s to the 1970s.  This display showed a wide range of the styles of pistols from plinking and pest control models to Olympic competition models.   

 

.22 Short pistols



The Model C

The Flite King

Advertising

Doran Houk's display was a nice overview of the types of target pistols produced by High Standard over the decades.  High Standard target pistols ruled the Bullseye firing lines for decades.
 


Early guns

Post WWII guns




Table items

I hope to see more members at the HSCA annual meeting in conjunction with more displays at the gun show in Birmingham, Alabama, in October.



HS Collectors Portland Oregon NW Regional Meeting - DATE CHANGED

The High Standard Collectors Association Portland Oregon NW Regional Meeting dates were changed a while back, and not everyone got the news. To avoid conflict with another big show, the Oregon Arms Collectors Gun Show and the HS Collectors Portland Oregon NW Regional Meeting were moved from August 25th and 26th, 2018, to August 11th and 12th, 2018. When I tried to book a room at the Airport Holiday Inn Express on the old dates there was a problem, but with the correct dates, it all worked out just fine.

OLD DATE

August 25th and 26th, 2018

NEW DATE

August 11th and 12th, 2018

Latest News On High Standard Company

Email from Jim Gray (Thursday, June 28): 

Please let the group know that HS has moved to Montana and intends meet all orders. 

The new address is

High Standard

 P O Box 547 

Fairfield, MT 59436 

jim

TINCANBANDIT's Gunsmithing: Firearm Factory of the Month: Hartford Arms and Equipment Company

TINCANBANDIT's Gunsmithing: Firearm Factory of the Month: Hartford Arms and Equipment Company


I ran across this article regarding Hartford Arms and posted to share.

Bob Shea Commemorative 10-X Victor

High Standard is producing a limited run of 10-X Victor style pistols commemorating the life of Bob Shea, one of the master gunsmiths with High Standard in Connecticut and with High Standard Mfg. Co. of Houston, TX.  Bob was a highly regarded gunsmith and produced around 184 10-X pistols while working in HS, Conn.  When High Standard in Houston, TX, began producing pistols in the early 1990s, Bob assembled a number of 10-X pistols for them over the years.  The 10-X pistols he worked on commanded a premium price over the normal 10-X pistols made in Houston.  He passed away January 4, 2015, at the age of 89, and High Standard decided to produce a limited number of 10-X pistols to commemorate his work.  These pistols were initially only offered to High Standard Collectors' Association members, however High Standard is now offering these to non-members as well.  There will be no more than 89 pistols made in this series.

I received my pistol today.  It has the optional Boron Nitride coating instead of the standard phosphate coating.  The controls are gold colored.  Otherwise, it is finished in the 10-X mode of matte black metal with black ambidextrous grips.  The barrel is etched on the right side with Bob Shea's signature and the limited edition numbering.  The magazine also has Bob's signature etched on it.  There is no barrel weight with this gun.

The pistol is shipped in a white cardboard box with a test target, instruction booklet, warranty card, Bob Shea 10-X patch, sticker, letter of authenticity, and a can cozy. 

The pistol is nice looking and appears to be well made.  The trigger pull is typical of High Standard target models, with a trigger pull weight of about 2.5 pounds.

The January 2018 issue of the HSCA Newsletter was mailed on Jan. 2 to the HSCA members that the membership director has received their 2018 dues. 

 

Many thanks to Dick Baker, John Stimson, jon Miller, Tom Bolander, Jim Gray, Dave Lehman, Kim Schillinger, Tom Horner, Marcia Mighell, Bert Markel, Gary Balaz, and Joe Pentino whose contributions made this Newsletter possible.